30608 Failed to load the pager component. Please re-install the pager component.
30609 Please enter a profile name.
30610 Please select a pager or SMS service.
30611 Please enter your pager or SMS ID number. This is typically the voice phone number you use to notify your pager.
30613 My Pager
30614 &Stop
30615 &Test
30616 Number
30617 ServiceName
30618 TextType
30619 Configurations
30620 Testing pager/SMS profile %s with ID number: %s. Enter a test message and press the Test button.
30621 pager.inf
30622 Name already used. Please enter a new profile name.
30623 Please enter a pager or SMS service name.
30624 Please enter a country code.
30625 Please enter a local number.
30626 Please enter your pager/SMS ID number. This is typically the voice phone number you use to notify your pager or cell phone.
30627 Please enter a unique pager/SMS service name.
30628 Profile name: %s.\n\n
30629 Service name: %s.\n\n
30630 Phone number: %s.\n\n
30631 PIN Number: %s.\n\n
30632 Type: %s.\n
30633 Terminal settings: 7E1.\n\n
30634 UCP OP Type: %02d.\n\n
30635 Pager Type is TONE.\n\n
30636 Pager Type is NUMERIC.\n\n
30637 Terminal settings: 8N1.\n\n
30638 Pager/Cell phone Type is ALPHANUMERIC.\n\n
30639 Dialing
30640 Change of the system configuration.
30641 A call is being handled.
30642 No line version support.
30643 Could not request a tapi line. There is no free tapi device.
30644 The selected tapi line does not support voice operations.
30645 The selected tapi line does not support data operations.
30646 The selected tapi line does not support MAKECALL operations.
30647 The selected tapi line is in use by a none-Tapi application.
30648 The selected tapi line cannot be used.
30649 Error on line.
30650 The selected tapi line is already in use by the application.
30651 The selected tapi line does not support partial dialing.
30652 The current operation has been finished.
30653 Ringing ...
30654 The configuration of the tapi line has changed.
30655 The selected tapi line does not work any longer.
30656 The selected tapi line has no connection.
30657 The selected tapi line does exist.
30658 Dialing
30659 Dial tone ...
30660 Dialing number ...
30661 Callback ...
30662 Line busy ...
30663 Special information. Maybe the number could not be dialed.
30664 Remote party disconnected.
30665 No connection. Reason unknown.
30666 The remote party refused the call.
30667 No connection: Pick up.
30668 No connection: Forwarded.
30669 No connection: No answer.
30670 No connection: Bad address.
30671 No connection: Unreachable.
30672 No connection: Congestion.
30673 No connection: Incompatible.
30674 No connection: Unavailable.
30675 No connection: No dial tone.
30676 No connection: Reason unknown.
30677 Connected to %s, sending data ...
30678 No connection to %s
30679 Cannot translate number.
30680 The information about the telephony service are corrupt.
30681 A component of the telephony driver is missing.\nPlease, use the system panel to configure the driver.
30682 You have two copies of the telephony driver installed.\nPlease, use the system control panel to delete one of them.
30683 Low memory. Operation cancelled.
30684 Tapi operation failed. Please, check your modem.
30685 A telephony resource is unavailable. Another application is using the tapi line. Please, wait.
30686 There are no tapi devices installed.\nDo you wish to start the system control panel to add a tapi device ?
30687 Cannot launch the system control panel.
30688 Line unavailable.
30689 Line unnamed.
30690 Closing connection ...
30691 Please enter your pager/SMS ID number. This is the number requested immediately after the call is answered.
30692 CountryName
30693 Controller must be stopped and restarted for your pager settings to be saved. Is it OK to shutdown the Controller?
30694 Line name empty.
30695 Connected, sending data ...
30696 Waiting for call ...
30697 Enter a number greater than 0.
30698 The message length must exceed 5 characters.
30699 Please wait until test is completed.
30700 Non-ANSI characters are not supported in a pager message.
30701 Specify the telephone number for your paging or SMS service. This number will be used to dial a computer terminal.
30702 Specify the telephone number for your pager.
30703 DTMF tone delay must be between 5 and 20 seconds. Setting delay to within range.
30704 Protocol delay for the terminal must be between 1 and 5 seconds. Setting delay to within range.
30705 \nHangup pager notification in progress.
30706 Changing the pager/SMS type has caused the terminal type to be reset. Please check the phone number to verify that it is correct. The message length and delay settings have also been reset.
30707 The number of letters before a word is split up must be greater than one.
30708 Default
30709 Pager/Cell phone Type is SMS text.\n\n
30712
30713 ALPHA,, NUMERIC, TONE, SMS
30714 There is no device that matches the service type. Please go back and select a different service.
